Customers range from big engineering firms, agents, and DIY home and factory owners. With the sale of the components we provide the customer with advice on the installation, use and service of the equipment.
We are also the agents and designers for WISY AG rainwater harvesting systems in Southern Africa and stock a number of their equipment. Most of the components we sell are critical elements in the design of good rainwater harvesting systems.
The operating principal and design is based on the highly successful stainless steel inline rain-water filter that Wisy AG built their success on.
Overflow protection for a rainwater tank is very important design feature.
By using a well designed overflow system you will protect vermin and insects from entering your rainwater tank. The overflow system is installed inside the rainwater tank. In underground tanks it is a critical requirement as it also protects the tanks from any back-flow that might occur in the underground storm-water piping.
The floating suction is connected to your rainwater supply pump. The suction floats just below the surface of the water in the rainwater tank. When the pump activates it withdraws the water just below the surface of the water in the rainwater tank. Technically it is the oldest water that you want to use first.
The smoothing inlet is an all stainless steel device that fits on the 100mm or 200mm or inlet pipe in the rainwater storage storage tank. It is positioned at the bottom of the rainwater tank. It is used to prevent the agitation of sediment at bottom the rainwater tank.
Primary rainwater filters are one of the most important items in your rainwater system. These filters are installed before the rainwater enters the rainwater tank. It filters out any debris bigger than 280 to 340 microns.